This guided form needs JavaScript for next/back navigation and PDF download. You can still fill out all sections below and submit.
01 / THE DETAILS
Let’s start with who you are and how we can reach you.
* Required. Everything else can wait.
Use an address where we can reach you about the site.
02 / THE DETAILS
Tell us your goal. You do not need an equipment list to get started.
A node means one complete server, not one GPU. Enter a whole number if known.
Your requested rack count; physical fit and load still need review.
Optional. Include the exact server model or attach the manufacturer specification.
IT equipment load only. Cooling and facility overhead are additional.
Future phase only; not included in initial rack count.
Local businesses, artificial-intelligence start-ups, a specific anchor tenant you already have.
Kilowatts and contract length, if any.
Optional. We can help assess feasible IT capacity after reviewing power, cooling and the building.
A planning preference; cooling method depends on the selected hardware and engineering.
A design goal, not a certification or availability guarantee.
Internet, remote hands, managed hosting, none.
03 / THE DETAILS
A few details about the property help us understand the possibilities.
Filled from a recognized address when possible; you can correct it.
Optional. Narrows utility suggestions; enter the county if your address was typed manually.
Approximate figures are fine. Leave blank if unknown or land only.
Steel frame, tilt-up concrete, masonry, wood.
Measured floor-to-obstruction height, if known. Leave blank if the site is land only.
Approximate square feet, and whether equipment may go on the roof or must sit on the ground.
Yes, no, size.
Type, age, tonnage.
Fenced, gated, cameras, 24-hour access.
04 / THE DETAILS
Share what you know. Please do not open electrical panels or approach energized equipment to complete this form.
This section is optional. Leave anything unknown blank.
Suggestions use EIA 2025 county/state records, not parcel-level service verification. Select your utility or type its name from your bill.
For example 1,200 A or 3,000 A. Leave blank if unknown.
And average monthly use in kilowatt-hours, if known.
Kilowatts available, cost and lead time, if you have asked.
05 / THE DETAILS
Existing equipment and your backup goals help shape the energy plan.
Kilowatt rating, fuel type, age, hours.
Kilovolt-ampere rating, age.
Yes or no; pressure and pipe size if known.
06 / THE DETAILS
Choose a starting approach. The York closed-loop options reflect the SmartTec Mead planning approach; final sizing follows your equipment and site conditions.
Preference only. York model, condenser type and electrical requirements are confirmed from the selected equipment quote.
Liquid-cooled servers can still need room cooling for equipment heat not captured by the liquid loop.
Optional. Attach the quote or datasheet. A prior SmartTec price is not a customer quote.
A standby chiller alone does not establish whole-system redundancy.
If known, include units and whether these apply to the facility loop or server loop. Do not guess.
Existing rack voltage does not establish chiller voltage, breaker size or starting requirements.
07 / THE DETAILS
Start with your current provider. Technical details are optional.
Search common U.S. providers or type a local carrier. Listing does not establish service availability.
A second provider does not by itself establish a physically diverse route.
Basic internet, carrier-neutral choice, direct cloud connection.
08 / THE DETAILS
Share any approvals or constraints you already know about.
Previous industrial use, underground tanks, asbestos, remediation.
Service organization control type 2, health-care privacy, payment card, none known.
09 / THE DETAILS
Choose “Unknown” when you have not checked. These answers guide further review.
10 / THE DETAILS
Your timing and budget help us plan a practical next step.
Engineering, equipment, deposits.
Engineer, electrician, broker.
11 / SUPPORTING MATERIAL
Add documents you already have. You can also submit without attachments and arrange to share them later.
Up to 5 files, 8 MB total. PDF, JPG, PNG, HEIC, DWG, DXF, XLSX or DOCX. Files go to SmartTec through FormSubmit when you submit; they are not embedded in your PDF.
Remove account numbers, access codes and other sensitive details before uploading. For confidential plans, contact us to arrange a suitable sharing method.
12 / READY WHEN YOU ARE
Review your answers. Download a PDF for your records, or submit your site to SmartTec.
An inquiry begins a review; it does not reserve capacity or establish a quote, engineering approval or financing commitment.
THANK YOU / NEXT STEPS
The delivery service accepted your site intake. SmartTec will review it and follow up using the email you provided.
You can still download a copy of your answers.
Answers stay in this page while you move between steps. Download a PDF before closing or refreshing.
